Copyright (C) 2001, 2002 by Michael Neumann (neumann@s-direktnet.de)
Released under the same term of license as Ruby.
Is the base class for all XML-RPC server-types (CGI, standalone). You can add handler and set a default handler. Do not use this server, as this is/should be an abstract class.
The arity (number of accepted arguments) of a handler (method or Proc object) is
compared to the given arguments submitted by the client for a RPC *1.
A handler is only called if it accepts the number of arguments, otherwise the search
for another handler will go on. When at the end no handler was found,
the default_handler will be called.
With this technique it is possible to do overloading by number of parameters, but
only for Proc handler, because you cannot define two methods of the same name in
the same class.
XMLRPC::BasicServer.new( class_delim="." )Creates a new XMLRPC::BasicServer instance, which should not be
done, because XMLRPC::BasicServer is an abstract class. This
method should be called from a subclass indirectly by a super call
in the method initialize. The paramter class_delim is used
in add_handler when an object is
added as handler, to delimit the object-prefix and the method-name.
XMLRPC::BasicServer#add_handler( name, signature=nil, help=nil ) { aBlock }Adds aBlock to the list of handlers, with name as the name of the method. Parameters signature and help are used by the Introspection method if specified, where signature is either an Array containing strings each representing a type of it's signature (the first is the return value) or an Array of Arrays if the method has multiple signatures. Value type-names are "int, boolean, double, string, dateTime.iso8601, base64, array, struct".
Parameter help is a String with informations about how to call this method etc.
A handler method or code-block can return the types listed at
XMLRPC::Client#call.
When a method fails, it can tell it the client by throwing an
XMLRPC::FaultException like in this example:
s.add_handler("michael.div") do |a,b|
if b == 0
raise XMLRPC::FaultException.new(1, "division by zero")
else
a / b
end
end
The client gets in the case of b==0 an object back of type
XMLRPC::FaultException that has a faultCode and faultString
field.
XMLRPC::BasicServer#add_handler( prefix, obj )This is the second form of add_handler. To add an object write:
server.add_handler("michael", MyHandlerClass.new)
All public methods of MyHandlerClass are accessible to
the XML-RPC clients by michael."name of method". This is
where the class_delim in new
has it's role, a XML-RPC method-name is defined by
prefix + class_delim + "name of method".
XMLRPC::BasicServer#add_handler( interface, obj )This is the third form of add_handler.
Use XMLRPC::interface to generate an ServiceInterface object, which
represents an interface (with signature and help text) for a handler class.
Parameter interface must be of type XMLRPC::ServiceInterface.
Adds all methods of obj which are defined in interface to the
server.
This is the recommended way of adding services to a server!
XMLRPC::BasicServer#get_default_handlerReturns the default-handler, which is called when no handler for
a method-name is found.
It is a Proc object or nil.
XMLRPC::BasicServer#set_default_handler ( &handler )Sets handler as the default-handler, which is called when no handler for a method-name is found. handler is a code-block. The default-handler is called with the (XML-RPC) method-name as first argument, and the other arguments are the parameters given by the client-call.
If no block is specified the default of XMLRPC::BasicServer is used, which raises a
XMLRPC::FaultException saying "method missing".
XMLRPC::BasicServer#set_writer( writer )Sets the XML writer to use for generating XML output.
Should be an instance of a class from module XMLRPC::XMLWriter.
If this method is not called, then XMLRPC::Config::DEFAULT_WRITER is used.
XMLRPC::BasicServer#set_parser( parser )Sets the XML parser to use for parsing XML documents.
Should be an instance of a class from module XMLRPC::XMLParser.
If this method is not called, then XMLRPC::Config::DEFAULT_PARSER is used.
XMLRPC::BasicServer#add_introspectionAdds the introspection handlers "system.listMethods", "system.methodSignature" and "system.methodHelp", where only the first one works.
XMLRPC::BasicServer#add_multicallAdds the multi-call handler "system.multicall".
XMLRPC::BasicServer#get_service_hookReturns the service-hook, which is called on each service request (RPC) unless it's nil.
XMLRPC::BasicServer#set_service_hook ( &handler )A service-hook is called for each service request (RPC).
You can use a service-hook for example to wrap existing methods and catch exceptions of them or
convert values to values recognized by XMLRPC. You can disable it by passing nil as parameter
handler .
The service-hook is called with a Proc object and with the parameters for this Proc.
An example:
server.set_service_hook {|obj, *args|
begin
ret = obj.call(*args) # call the original service-method
# could convert the return value
resuce
# rescue exceptions
end
}require "xmlrpc/server"
s = XMLRPC::CGIServer.new
s.add_handler("michael.add") do |a,b|
a + b
end
s.add_handler("michael.div") do |a,b|
if b == 0
raise XMLRPC::FaultException.new(1, "division by zero")
else
a / b
end
end
s.set_default_handler do |name, *args|
raise XMLRPC::FaultException.new(-99, "Method #{name} missing" +
" or wrong number of parameters!")
end
s.serve
Implements a CGI-based XML-RPC server.
XMLRPC::CGIServer.new( *a )Creates a new XMLRPC::CGIServer instance. All parameters given
are by-passed to XMLRPC::BasicServer.new. You can only create
one XMLRPC::CGIServer instance, because more than one makes
no sense.
XMLRPC::CGIServer#serveCall this after you have added all you handlers to the server. This method processes a XML-RPC methodCall and sends the answer back to the client. Make sure that you don't write to standard-output in a handler, or in any other part of your program, this would case a CGI-based server to fail!
Implements a XML-RPC server, which works with Apache mod_ruby.
Use it in the same way as CGIServer!
require "xmlrpc/server"
s = XMLRPC::Server.new(8080)
s.add_handler("michael.add") do |a,b|
a + b
end
s.add_handler("michael.div") do |a,b|
if b == 0
raise XMLRPC::FaultException.new(1, "division by zero")
else
a / b
end
end
s.set_default_handler do |name, *args|
raise XMLRPC::FaultException.new(-99, "Method #{name} missing" +
" or wrong number of parameters!")
end
s.serve
Implements a standalone XML-RPC server. The method serve) is left if a SIGHUP is sent to the
program.
XMLRPC::Server.new( port=8080, host="127.0.0.1", maxConnections=4, stdlog=$stdout, audit=true, debug=true, *a )Creates a new XMLRPC::Server instance, which is a XML-RPC server listening on
port port and accepts requests for the host host, which is by default only the localhost.
The server is not started, to start it you have to call serve.
The parameters maxConnections, stdlog, audit and debug are passed to the HTTP server and specify it's behaviour more precise.
All additionally given parameters in *a are by-passed to XMLRPC::BasicServer.new.
XMLRPC::Server#serveCall this after you have added all you handlers to the server. This method starts the server to listen for XML-RPC requests and answer them.
XMLRPC::Server#shutdownStops and shuts the server down.
XMLRPC::Server#set_valid_ip( *ip_addr )Specifies the valid IP addresses that are allowed to connect to the server.
Each IP is either a String or a Regexp.
XMLRPC::Server#get_valid_ipReturn the via method set_valid_ip specified valid IP addresses.
require "webrick"
require "xmlrpc/server"
s = XMLRPC::WEBrickServlet.new
s.add_handler("michael.add") do |a,b|
a + b
end
s.add_handler("michael.div") do |a,b|
if b == 0
raise XMLRPC::FaultException.new(1, "division by zero")
else
a / b
end
end
s.set_default_handler do |name, *args|
raise XMLRPC::FaultException.new(-99, "Method #{name} missing" +
" or wrong number of parameters!")
end
httpserver = WEBrick::HTTPServer.new(:Port => 8080)
httpserver.mount("RPC2", s)
trap("HUP") { httpserver.shutdown } # use 1 instead of "HUP" on Windows
httpserver.start
Implements a servlet for use with WEBrick, a pure Ruby (HTTP-) server framework.
$Id: server.rb,v 1.50 2002/10/24 17:28:59 mneumann Exp $
*1Remote Procedure Call